Weight of metals basis specific density

Metals used in Switchboard Assemblies are CRCA, Al, Cu, etc have specific Weight basis its Density of Atoms for given volume.

The formula for weight calculation is:

Weight = (L / 1000) x (W / 1000) x ( t ) x ( ρ )

  • Weight in Kg
  • L = length in mm
  • W = width in mm
  • t = thickness in mm
  • ρ = Specific material density in kg/m3

Specific Density various Metals :

Material NameAtomic SymbolDensity Kg/m3
AluminiumAl2.70
ZincZn7.13
TinSn7.28
IronFe7.87
SS3047.94
SS3167.99
CopperCu8.96
SilverAg10.5
LeadPb11.35
GoldAu19.32
Density, Melting Temperature of various Metals

CRCA Sheet Weight Chart :

Length (mm)Width (mm)Thickness (mm)Weight (Kg)
1000100017.87
100010001.29.44
100010001.612.59
100010002.015.74
100010002.519.68
100010003.023.61
100010003.1524.79
CRCA Sheet Weight Chart

Aluminum & Copper Busbar Weight Chart :

Length (mm)Width (mm)Thickness (mm)Weight (Kg) AlWeight (Kg) Cu
100050101.354.48
100060101.625.38
100075102.036.72
100080102.167.17
1000100102.78.96
1000120103.2410.75
1000125103.3811.20
1000150104.0513.44
1000160104.3214.34
1000200105.417.92
Aluminum & Copper Busbar Weight Chart
What is Specific Density of material?

The Ratio between mass and volume of material determines the Specific Density, its units are kg/m3 or gm/cm3

What is Specific gravity?

It is the ratio between the density of an object and a reference substance, it does not have units.

What is I2t – Let through Energy ?

I2t – Let through Energy is available thermal energy resulting from Current Flow during circuit opening in Fuse, MCCB, MCB.Unit is A2S (Ampere2 Second)

Methods of Heat Transfer

Heat is a flow of energy from higher temperature object to lower temperature object. Heat transfer continues until two objects reaches thermal equilibrium.

Factors affecting short circuit fault

Short-Circuit fault allows the current to flow through unintended path with very low impedance, which results into excessive current flow through the path.