What are Utilization categories A and B, for Circuit Breakers ?

Circuit Breaker with Short Time withstand Icw capacity are Calassified as Category B (eg. ACB), and without Icw are Category A (eg. MCCB, MCB).

Utilization categories A and B in Circuit Breaker classification.

According to IEC 60947-2, Utilization category of a circuit breaker shall be stated with reference to whether or not it is specifically intended for selectivity by means of an intentional time delay with respect to other circuit breakers in series on the load side under short-circuits conditions. The utilization category of a circuit-breaker shall be stated with reference to whether or not it is specifically intended for selectivity by means of an intentional time delay with respect to other circuit-breakers in series on the load side, under short-circuit conditions.

Circuit Breaker with Short Time withstand Icw capacity are Calassified as Category B (eg. ACB), and without Icw are Category A (eg. MCCB, MCB).

Utilization category A :

  • Without an intentional short-time delay for selectivity under short-circuit condition and therefore without a short-time withstand current rating.
  • Circuit-breakers not specifically intended for selectivity under shortcircuit conditions with respect to other short-circuit protective devices in series on the load side,
  • i.e. without an intentional short-time delay provided for selectivity under short-circuit conditions, and therefore without a short-time withstand current rating.
  • eg: MCCBs, MCBs., (Some MCCBs are Cat B, with Icw)
  • Utilization Category A breakers are Current Limiting.

Utilization Category B

  • With an intentional short-time delay (which may be adjustable) provided for selectivity under short-circuit conditions.
  • Such circuit-breakers have a short-time withstand current rating.
  • Circuit-breakers specifically intended for selectivity under short-circuit conditions with respect to other short-circuit protective devices in series on the load side,
  • i.e. with an intentional short-time delay (which may be adjustable), provided for selectivity under short-circuit conditions.
  • Such circuit-breakers have a short-time withstand current rating.
  • eg: ACBs. (Some ACBs are Cat A, current limiting)
  • Utilization Category B breakers are Selective (non current limiting)

What causes Arc Flash?

Arc flash occurs when electrical current becomes uncontrolled, results in release of energy that ionizes air, releasing enormous heat, light, sound.

What is Ambient Air Temperature?

Reference Ambient Air Temperature is one third (1/3) of sum of Maximum Air Temperature “Current + Daily Average + Annual Average + 10°C”. As per IS 9676.

Factors affecting short circuit fault

Short-Circuit fault allows the current to flow through unintended path with very low impedance, which results into excessive current flow through the path.

How to do Powder Coating ?

In Powder coating process, CRCA surface is given Anti Corrosive Surface treatment, then Epoxy Powder is applied, melted and hardened.

What is Electrical Insulating Materials ?

Nonconducting material that provides electric isolation of two parts at different voltages.
It must have an electrical resistivity and a dielectric strength sufficiently high for the given application.
The secondary requirements relate to thermal and mechanical properties.