What is Energy Control Program ?

Energy Control Program makes sure that Equipment is isolated from energy source and made inoperative before planned Service/Maintenance.

As per OSHA 29 CFR 1910.147 , Employer are expected to develop Energy Control Program suitable to their workplace and Equipments ensuring program meets requirements of the standard.

Purpose of Energy Control Program is to make sure that Equipment must be isolated from energy source and made inoperative before Service/Maintenance to be done, if there is possibility of unexpected startup that Equipment.


The intent of Energy Control Program is to ensure that before Employee does Service/Maintenance of Equipment, where the potential exists of Unexpected Energization/Starup of Equipment OR Release of stored Energy, the Equipment is isolated from Energy source and rendered inoperative.


The Energy Control Program has 3 core Components :

  1. Energy Control Procedures detailing and documenting (Scope, Purpose, Technology, Authorization rules etc ),LOTO specific information, while authorised employee utilizes LOTO for Control of Hazardous Energy.
  2. Regular Periodic audit of Energy Control Procedures to be implemented.
  3. Regular Periodic Training to ensure intended purpose and functioning of Control of Hazardous Energy.

 

Fire Classification

Fire Classification basis Material Involved in Fire and Essential Extinguiser Effect required for Fire Suppression.

What is Arc Flash assessment?

Arc Flash assessment determines the degree to which worker may be exposed to potential Arc Flash Hazards and what kind of PPE is required.

LOTO – Lockout Tagout

LOTO – Lockout Tagout is the Physical restraint of Device as Hazardous Energy source, While doing Servicing/Maintenance.

When can Arc Flash occur ?

Arc Flash occurs when insulation or isolation between electrified conductors is breached or can no longer withstand the applied voltage.

What is Arc Flash ?

Arc Flash is light and heat produced as a result of Arc Fault, due to low impedance path, which causes electrical explosion or discharge.

What is Arc Blast ?

Arc Blast is the supersonic shockwave produced when the uncontrolled Arc vaporizes the metal conductors and expanding Plasma.

Degree of Burn

Degree of Burn is the level of depth of Burn effect on the human skin up to bones.