Effects of Arc Blast overpressure on Structure and Worker

Arc Blast overpressure is created due to blasting molten metal and expanding plasma inside of the ASSEMBLY.
Due to Arc Fault, the massive energy Released – Arc Blast is created due to blasting molten metal and expanding plasma inside of the ASSEMBLY with extraordinary force, which Damages the Assembly and throws not only metals pats, doors but can also blow worker away from the Arc. This Blow of worker may be more severe than Arc Burn.
Overpressure Wind Speed Effects on Structures Effects on Human Body
1 psi 60 kmph Following may Break/Shatter :
Panel glass doors,
LCD Glass of Meters or Switchgear,
Panel Room Window glass
Minor injuries to human body
may happen due to Glass
break/shatter.
2 psi 110 kmph Moderate damage to
Switchboard Assembly and
Panel Room may happen.
Major injuries to Human body,
due to flying debris may happen.
3 psi 160 kmph Switchboard Assembly may Collapse
And Panel Room Structure
may also get collapse.
Major injuries to Human body
will be obvious, and fatalities
are likely.
5 psi 260 kmph Panel Room and
Building Structure may Collapse.
Fatalities are likely in the Panel room.
10 psi 470 kmph Reinforced concrete building
may get damaged.
Fatalities are likely beyond Panel room,
near by room and Structures.
20 psi 800 kmph Heavily built Reinforced concrete Building
may get demolished.
Fatalities are likely in the entire
Building Structure.
Effects of Arc Blast overpressure on Structure and Human Body
What is “psi” in Pressure?

Psi is pounds of force per square inch area.
1 pound = 0.454 kg
1 inch = 2.54cm
1 psi = Pressure due to Weight of 1 pound/0.454 kg on 1 inch2 / 2.54 cm2 of area.
1 psi = 6894 N/m2
1 psi = 0.068 atmosphere

What is Arc Blast?

Arc Blast is the supersonic shockwave produced when the uncontrolled Arc vaporizes the metal conductors.
The massive energy released in the Arc fault rapidly vaporizes the metal conductors involved, blasting molten metal and expanding plasma inside of the ASSEMBLY with extraordinary force, which Damages the Assembly and throws metals pats, doors, this can be big damage for Asset Protection and Employee Protection.

What is color of Arc Blast Smoke ?

After the Arc Blast, Metal vapors while cooling down becomes oxide of the metal of the arc, during this minute particles appars like smoke.
Color of this Metal Vapor/Smoke will be as follows :
Iron: Black.
Copper: Black.
Aluminum : Grey.

Related Articles:

    Factors affecting short circuit fault

    Short-Circuit fault allows the current to flow through unintended path with very low impedance, which results into excessive current flow through the path.

    What causes arc flash?

    An arc flash causes a very loud sound created by quickly-moving air, or a sound wave, that can reach 140 decibels at a distance of

    Arc Flash Hazard Risk Category

    HRC – Hazard Risk Category is determined by amount of Incident Energy released upto defined boundary from the source of Arc Flash Point.